Zoom Function; Signal Quality - Extel WESV 82600 Instrucciones De Uso E Instalación

CH1
CH3
Note: in QUAD mode the keys "M",
QUAD mode by pressing p qt u .
h. Zoom function
Press the button
mera.
You have the possibility to move the zoomed video with the arrow buttons pqtu of the
remote control unit or the monitor.
Press again the same button to return to the initial video.
i. Signal quality
The reception quality is represented by bars at the left side of the antenna symbol on the left
upper corner of the video. The higher the number of bars, the better signal quality.
See table below.
Level of signal
Very good
Good
Medium
Low
Absent
CH2
CH4
and
of the remote control unit to zoom in the video of the selected ca-
Display
1062~1280Kbps
725~1062Kbps
543~725Kbps
250~543Kbps
CFI EXTEL WESV 82600 - 06/2009 - V1
The camera 1 in the left upper corner of
the screen
The camera 2 in the right upper corner of
the screen
The camera 3 in the left lower corner of
the screen
The camera 4 in the right lower corner of
the screen
Black screen for the cameras non-connec-
ted or not activated (OFF).
are not activated. First you should exit
Flow VGA FPS
5~10Fps
0~250Kbps
QVGA FPS
15~30Fps
3~5Fps 12~20Fps
2~4Fps 8~15Fps
0~1Fps 0~4Fps
0Fps 0Fps
13GB