Accessories; Storage - Texas Hobby 500 B Manual De Instrucciones

Accessories

Pneumatic tyre:
12" tyre with tractor pattern, for use with rake, push hoe and ridging plough.
No. 91053000100
Wheel weights:
Set of weights for mounting on the rim of the pneumatic wheels.
Weight 10 kg each.
No. 91097000100
Push hoe:
Loosens weeds in the garden or farmyard, working width 65 cm.
No. 91061500100
Ridger :
Used to ridge between row crops, especially potatoes.
No. 91060500100
Rake:
Used to rake paths and entrances with loose stones, for instance pebbles.
The rear bracket and 12" wheels are required.
No. 91062500100
Digging claws:
Digging claws are used together with the ridger.
No. 91060600100
Sweeper
Front mounted sweeper, working width 60 cm
No. 91059500100
Rear bracket
Used for rear mounted accessories.
No. 91059000100

Storage

Follow the procedure below when the machine is to be unused for a long period. This will
ensure the machine has a long service life.
Use your garden hose to wash off any soil and dirt. Clean the rotor shaft of any grass, etc.
The chassis number should only be cleaned with a moist cloth otherwise it may be
damaged. Avoid using a high pressure cleaner for cleaning. Clean the body with a damp
cloth so all the surfaces are clean. The surface must be wiped with an oily cloth to prevent
rust.
You should always store your machine in a dry, clean place.
15
Figure
16
Figure
17
Figure
18
Figure
19
Figure
20
Figure
21
Figure
22
Figure
23