System Operation; Indoor Unit; Outdoor Unit - König Electronic SEC-PH340 Manual De Uso

System Operation:

Both in/outdoor units will be in standby mode (no image/ sounds) when the green light LED of the
outdoor unit is on and supplied with power.

Indoor unit:

Press the „ „ button to activate the monitoring mode.
(The red light LED will be on)
Press the „ „ button again to exit the monitoring mode.
1. When visitors press the door bell, the image on the answering unit will turn on automatically.
2. Press the „ „ button to talk with the visitor.
3. Press the „ „ button to open the door, the image/ sounds will be off for 2 secs and then return
to the state before unlocking.
4. Press the „ „ again to exit the conversation (image/sound off).
5. Press the „ / „ button on the indoor unit to adjust the speaker volume.
6. Press the „ „ button to activate 7"TFT function, eight options including:
BRIGHTNESS/CONTRAST/SHARPNESS/COLOR/HUE/VIDEO/VCOMA/ VCOMD
Under each OSD, users can select the above features by pressing „
the selected program will turn red, press
„ „ or „ „ to adjust the effect to your desired level.

Outdoor Unit:

1. Press the „ „ button, the LED light will turn red, and both outdoor unit and indoor unit will start the
ring tone for 5 ~10 sec (vary from different ring tones).
2. Press the „ „ button again to repeat the ring tone. If no one answered, the outdoor unit will auto-
matically return to the standby mode with green LED light after 1 min.
Notes:
1. Monitoring Duration (per triggered):
2. Ring Tone (per triggered):
3. Conversation Duration:
4. UNLOCK:
in turn to select the other programs, after selection, press
1 minute
1 minute
4 minutes
2 seconds
4
„ and „ „ buttons, LED light of