Activating Access Badges; Registering Configuration Badges (Red Coloured) - THOMSON SMART 762 Manual De Usuario

Colour video interCom 18Cm

5 - ACTIVATING ACCESS bADGES

Note: If the badges provided are pre-paired in the
factory, you do not need to complete the following
procedure. It is useful when resetting the device
following an incorrect operation or the loss of an
access badge.
5.1 - REgISTERINg CONFIgURATION
BADgES (RED COLOURED)
• The configuration badges provided allow you to
add or remove access badges. Configuration
badges cannot unlock access controlled with
the video doorkeeper.
• Only 2 configuration badges can be partnered
with the product. If you try to pair a third badge,
it will deactivate the first.
C - iNSTALLATiON
• To pair a configuration badge, while video
doorkeeper is off, press the pairing button
on the back of the intercom panel. The
doorkeeper goes into badge reading standby
for 90 seconds.
1
2
• Wave the red badge in front of the intercom
panel's name plate at a distance of no more
than 5 cm. Once the badge is read and
recorded by the intercom panel, it will emit a
long beep followed by 2 short beeps.
• Wait 90 seconds or press on the call button to
return to normal operation.
• Repeat the full procedure for the second badge
if necessary.
EN EN
13