Technical Data - therm-ic SuperMax Powerpack Modo De Empleo

INSTRUCTIONS FOR USE / ENGLISH
Table of Contents:
Introduction
Package contents
Safety precautions

Technical data

First use and charging the Powerpacks
Description of functions
Important usage notes
Use and functions
Heat levels
Service, storage and care of the Powerpacks
Methods for attaching the Powerpacks
Disposal
Accessories and spare parts
I NT RO DU CTI O N
Congratulations on your purchase of a Therm-ic
Supermax Powerpack.
8
Please read the instructions for use carefully before first
using the device.
8
Please keep these instructions and give them to others
8
who may use the product.
8
Therm-ic Powerpacks provide power for all Thermic-
9
Soles (heated Therm-ic insoles) or shoes/soles with
9 ThermicInside (with pre-installed Therm-ic heating
systems).
10
10
11
11
PAC KA GE C ONT E NTS
11
2 Ni-MH battery packs (Supermax Powerpack)
- rechargeable, with integrated heat level switches
11
1 charger
12
12
S A F E T Y P RE C A UT IO N S
If you have problems sensing hot or cold objects (e.g.
diabetics, disabled persons etc.), please consult your
doctor before using the unit.
Check your feet regularly for reddening of the skin.
Excessive heat levels over prolonged periods can lead
to burns. Children should use the unit only under the
supervision of adults
Powerpacks are water-resistant. If you have attached
the Liionpack to your shoes, these should always
be connected to the heatable soles when outdoors
(even if not switched on), to prevent moisture or dirt
from entering the socket or plug. If water enters the
Powerpack, drain the water and allow the unit to dry.
For recharging, use the Therm-ic original power
adapter. It is designed for indoor use and may not be
exposed to moisture.
Do not insert any objects, especially metal objects,
into connecting sockets or plugs to avoid damaging
the unit.
If damage to connecting cables or other parts of the
unit is found, do not use the unit. Do not make any
modifications to the unit or use it for any unintended
purpose. Repairs to the unit or its connecting leads
should only be performed by the manufacturer.
If questions or problems arise, please get in touch
with your dealer or the manufacturer.
Dispose of used Liionpacks properly.
Do not throw Liionpacks into an open fire, as there is
a risk of explosion
T EC H N IC AL DATA
Charger
(available accessory from Therm-ic):
Input: 110V-240V ~ (50/60Hz), 400mA
Output: 2x (6V / 500 mA)
F IR S T U SE AN D CH A R GI N G
TH E P O WER PAC K S
Preparing the charger:
Press the appropriate adapter into the slot on the back
of the charger until it locks in with an audible click.
NOTE: Please be sure to observe the provided infor-
mation sheet as well!
9