Inserting Roof Panels - Rion ECO Greenhouse Manual Del Usuario

Inserting Roof Panels

Once the glazing elements are in place, insert panels and windows
in the following manner:
1 Make sure that the the plastic identification strip indicating the
side with UV protection is facing outside.
1
2 Peel away a little portion of both edges of the ID strip.
3 Slip one corner into the RD glazing element.
4 Continue inserting the panel until it is fully in.
5 Center the panel, if necessary.
6
The callout (6) shows an enlarged cross-section of the profile and
glazing element when it is seated correctly
2
3 4 5
English