Nostalgia Products CCM600 Instrucciones Y Recetas página 8

PARTS
(A) Bowl & Dome
(E) Push Handle
(I) Cross Bar
ASSEMBLY OF BASE SUPPORT
1. Insert Cross Bar (I) into the square
inserts on the inside of Base Support
(G) and secure from below with two
#2 Bolts and two #5 Flat Washers.
2. Insert the Leg Assembly (H) into the square
inserts between the ends of the Base Support
(G) and fasten from inside with two #4
Bolts, two #6 Flat Washers and two #7 Nut
Caps and from the top with two #2 Bolts.
(B) Sugar Shovel
(F) Wheels
(J) Screwdriver
(C) Main Unit
(G) Base Support
(K) Wrench #1
(D) Display Tray
(H) Leg Assembly
(L) Wrench #2
6