Selecting Languages; Selecting Titles - FujiFilm ENDEAVOR FOTONEX 3500ix ZOOM MRC Manual De Instrucciones

ENGLISH--------------------------------------------
(pre-flash) , then tires the sixth time for taking a picture.),
allowing you to take beth the night scene and person(s)
clearly.
''This mode is automatically cancel led per shot.
:;: Under the night portrait mode, the shutter is set ta a low
speed. The person(s) being photographed must stay
still until the shutter trips, and a tripod should be used
ta avoid camera shake.
'''The backlight compensation flash mode, flash off mode,
landscape mode, and night portrait (slow sync) mode
will be cancelled automatically as the power tums off.
• When you want to use the landscape mode or night
portrait mode successively, keep on pressing the Mode
Butten until the sign changes from lighting to blinking
(for about 2 seconds). The selected mode will be held
even atter a shot , and you can take pictures succes-
sively. The mode is automatically cancelled when the
power turns off.
SELECTING LANGUAGES
Y
our camera
allows you ta select a language indicated on the Liq-
uid Crystal Display (LCD) out of 13 different languages. When
one language is selected , ali displays wi ll be changed, and the
selected title will also be printed in the selected language.
32
*The exposed frames are not changed.
*For selectable languages, refer to pages 155 through 159.
"' Wh en Dutch is selected out from languages, the tille will appear
in British English.
lii!ID
Keep on pressing in the ST Butten. The currenlly selected
language wi ll blink.
lm
With the ST Butten pressed in, press in the top or bottom
Change Butten. The currently selected language will be
changed to ethers. When the desired language appears,
release the ST Butten from the depression. The language
is decided to the displayed language, and mode changes
to "Select Tille Registration Change" mode.
(For the select tille registration , refer to page 33.)
lm
First, press in the ST Butten
0
once, then press in the
Clear Butten
0
once. The LCD wi ll be reset to the date
display.
SELECTING TITLES
1
With the Advanced Photo System
1
Messages and titles can be selected when taking pictures, and
the selected messages or titles can be printed on the back of prints.
The following ten tilles are registered before shipping out the cam-
era from the factory.
1. Vacation 3. Party
2. Wedding 4. 1 love you.