Specifying Print Quantity; Changing Specified Print Quantity - FujiFilm ENDEAVOR FOTONEX 3500ix ZOOM MRC Manual De Instrucciones

34
ENGLISH - - - - - - - - - - - - - - - - - - - - -
~
Press in the ST butten 0 once to register the desired title
- . . . . first , and then , press in the Clear Butten 8 once. The
display will return to the date.
SPECIFYING PRINT QUANTITY
liB
1
With the Advanced Photo System
1 .
The desired print quantity for each frame can be spect-
fied when taking pictures. The necessary print quantity is
simultaneously printed at the first printing so that trouble-
sorne reprinting is not necessary. 0 ta 1 0 prints can be
specified for each frame .
.,_,.. Press in the PO Butt?n
0 ,
first.
T ~e
print quantity
spe~i­
~
fication display will bllnk on the ma1n LCD. Next, press 1n
the top or bottom Change Bullon
8
to specify the desired
prin! quantity.
:;: When the number is zero, no print will be made.
~
Press in the Date Butten. The main LCD will be reset ta
- the date display, and "P" and specified prin! quantity will
be displayed.
::: When you want to cancel the print quantity specifica-
tion , press in the PQ butten once, and press in the Clear
Button successively. The "P" will disappear from the
main LCD and the specified print quantity will be can-
ce lled.
~ Press in the Shutter Release to lake a picture . The film
lllliMill will be advanced and print quantity wi ll be recolded.
:.;: The print quantity specification will be automatically
cancelled per shot.
CHANGING SPECIFIED PRINT QUANTITY
The prin! quantity of the last exposed frame can be changed any
number of times as long as the next frame has not been expos~d .
This feature is convenient when you miss to specify print quantlty
before shooting or you failed in shooting and you don't want to
print. . . .
* The print quantity cannet be changed when the f1lm cartndge 1s
changed in a mid-roll or battery is taken out. .
~
First, press in the PQ button
0
once , and
~ext
•. press 1n
.......,. the top or bollom Change Button
8
to spec1fy pnnt quan-
tity.
~
Keep on pressing the left l1and Change Button . "Date
~
Change• will appear on the mam LCD. The d1splay w1 ll
thereafter change to the date display.
*
The print quantity can be changed only when the left
hand Change Button is pressed in con ti nuously until
the date is displayed on the main LCD .
~
''P'' will appear, the film is rewoun,d
.?n~ fr~me,
the print
.......,. quantity will be changed , and the · P w1ll d1 sappear.