hjh OFFICE SAFE COMPACT II Manual Del Usuario página 8

OPEN THE SAFE FOR THE FIRST TIME WITH KEY
• Push the end of the cover to access the keyhole.
• Insert the backup key into the keyhole and turn counterclockwise. At the same time, turn the
knob (master key) clockwise to open the door.
WARNING: Do not store your back up keys inside the safe.
NOTE: You must turn the key back to the locked position before you are able to close and lock
the door.
SYSTEM INITIALIZATION/DELETION
Press the reset button and hold for about 5 seconds until the green light flashes 10 times with
audible beeps. It means the memory of all recorded fingerprints has been cleared.
IMPORTANT NOTES FIPRINT
• Do not use liquid or a sprayer to clean the safe. Use a damp cloth instead.
• Do not place the product in an insecure and elevated place, lest it may fall over and damage
the product or hurt people. Never spill liquid over the control panel, or it may cause electrical
shock to the electronic parts inside and disable their proper functions.
• Never try to dismantle the product by yourself. Unguided Dismantling and incorrect reassembly
of the inside of back cover may damage the electrical circuit and affects its performance. Whe-
re maintenance is required, please contact the local service center or local distributor.
For any help, kindly consult the local distributor
EN
3