Preparing For Use; Safety Precautions - Rowenta TN5011 Modo De Empleo

NOT 011488.qxd 15/03/05
You have chosen this clipper with a view to cutting and tidying hair easily and conveniently.
The quality of the product and its precisely adjusted cutting lengths make it a professional-grade tool.
Please read the instructions before using the appliance, to avoid any risk arising from improper use.
1. DESCRIPTION OF THE CLIPPER AND ITS ACCESSORIES
A. On/off button
B. Adjustable comb attachment
C. Cutting-length adjustment button
D. Cutting-length indicator
E. Long hair comb = 24-27-30-33-36-39-42 mm
F . Short hair comb = 3-6-9-12-15-18-21 mm
G. Beard and trimming comb = 1-4-7-10-13-16-19 mm
H. Cutting head
I. Power "on" indicator
J. Adapter
K. Cleaning brush
L. Barber's comb
M. Pair of scissors
N. Storage pouch
+ Instruction booklet.

2. PREPARING FOR USE

Voltage:
• Your appliance has been designed to use 220-240V only.
• Check that this voltage matches the voltage of your electricity supply.
You have chosen a rechargeable appliance, designed for use with mains power or in autonomous
(cordless) mode.
A. Mains operation:
• Switch the On/Off button to 0 (Fig. 2)
• Plug the connector into the appliance (Fig. 3) and the adapter into the mains socket (Fig. 4)
• Turn the appliance on (Fig. 5)
n During use, the appliance does not recharge.
B. Cordless operation:
The appliance functions with its accumulators.
• Before using it for the first time, charge the appliance with the adapter for 14 hours. The next 3 times
you use your clipper, it is important to let it discharge completely.
The recommended charging time is 8 hours. When the charging indicator is red, your appliance is
charging.
• Once the transformer has been unplugged, the appliance is ready for 40 minutes of cordless operation.
IMPORTANT:
To avoid damaging the accumulators:
• Never charge them for longer than 20 hours at a time.
• Only charge the accumulators when there is a noticeable drop in the appliance's performance, or if the
appliance has not been used for over 6 months.

3. SAFETY PRECAUTIONS

• Unplug the appliance before removing the comb attachment, etc. and after use.
• Any error when connecting the appliance can cause irreparable harm, not covered by the guarantee.
• Do not use or recharge the clipper near baths, basins, showers or other recipients containing water.
• Your appliance is designed for use in the home only. Do not use the clipper for more than
10 minutes without a pause.
• Important: the clipper and the adapter must not be immersed or held under running water.
• Do not leave the appliance for long periods at temperatures below 0°C or above 40°C (behind
glass in full sunlight, for example).
• Do not expose the appliance to direct sunlight for long periods.
• Do not use an extension lead in your bathroom.
• Keep the cord, appliance and accessories away from any source of heat.
9:48 Page 10
GB