NOT 036996 OK
1/02/05
9:37
Page 14
You have chosen this clipper to make short haircuts or general trimming easy.
GB
Its carefully monitored production process and precise adjustments for the length
of the cut make it a quality professional tool.
Read the instructions before using the appliance and avoid any danger caused by improper usage.
1 - DESCRIPTION OF THE CLIPPER AND ITS ACCESSORIES
Mod. HC 190 / HC 200:
A. Cutting wheel with precise adjustment system for the length of the cut.
B. Start/Stop button.
C. Side buttons for locking/unlocking the combs and the blade protector.
D. Combs (3-6-9-12-20-25).
E. Cleaning brush.
F . Hairdressing comb.
G. Pair of scissors.
H. Blade protector.
I. Cutting head.
J. Adapter - 2.4V for mains supply model & 3V for rechargeable model.
+
book of instructions.
Rechargeable model only: (HC 200)
K. Battery charge light.
L. Batteries.
M. Battery catch-release cover.
N. Storage case.
2 - FIRST TIME USE
Voltage:
• Mains supply model: with adapter and input voltage of 230 V 50 Hz, output voltage of 2.4 DC
• Rechargeable model: with voltage adapter: input 230 V 50 Hz, output voltage 3 V DC
• Your appliance is only designed to function at 230V.50Hz.
• Check that this voltage corresponds with that of your place of usage.
If you have chosen a rechargeable appliance, you can use it with the mains supply or
in autonomous mode (cordless)
A - In mains supply mode: (models HC 190 / HC 200)
• Turn off the appliance: Start/Stop button in position O (Fig. 2)
• Plug the connector into the appliance (Fig. 3) and the adapter into the mains supply (Fig. 4)
• Start the appliance (Fig. 5)
There is no recharging during usage
B - In autonomous mode: (model HC 200 only)
• The appliance functions with 2 batteries
• Capacity: 1.2V / 600mA. (Per unit)
• Type: Ni -Cd
IMPORTANT ADVICE:
To optimise the life-span of the batteries
• Before first-time usage, charge the appliance using the adapter for 14 hours. For the next
3 times you use it, it is important to allow the battery to run down completely.
A recharge time of 8 hours is recommended. When the battery recharge light is red,
your appliance is charged
• Having unplugged the transformer, autonomy is approximately 50 minutes.