Power Supply And Recharge - TEXA eLight ONE Manual Tecnico

11 POWER SUPPLY AND RECHARGE

The device is powered by an internal rechargeable lithium-ion battery.
The charge is provided by the IPC 30 charger.
1. Red LED
2. Green LED
3. Plug connector
4. Plug *
5. Power supply jack
(*) Europlug in the image as an example.
Only use the appropriate plug for the type of outlets in your
workshop.
The charger has two LEDs that show the charging status:
LED
Green
Red
The device can be disconnected from the mains by means of the external
charger's plug.
82
STATUS
OFF Not connected to the device.
Connected to the device.
blinking
Charge in progress.
steady ON Charge complete.
blinking Error.
MEANING