Targus DEFCON SCL Manual Del Usuario página 10

Targus notebook security DEFCON
3. After the alcohol dries, remove the backing on the base plate to
expose the adhesive and place it on the prepared location. If desired,
secure the base with the two screws.
NOTE: WHEN USING THE ADHESIVE BACKING, APPLY AT ROOM TEMPERATURE
-60°F (16°C), AND ALLOW IT TO BOND FOR MORE THAN 24 HOURS. NOT
RECOMMENDED FOR USE OUTDOORS OR IN A HIGH HUMIDITY ENVIRONMENT.
BONDING TO GLASS, CERAMIC TILE, WATER-ABSORBENT MATERIALS, COPPER,
BRASS, OR PLASTICIZED VINYL WITHOUT PRIMER SURFACE ARE NOT
RECOMMENDED. TARGUS RECOMMENDS USING BOTH ADHESIVE AND SCREWS TO
PROVIDE MAXIMUM SECURITY. USING ONLY THE ADHESIVE PROVIDES MARGINAL
SECURITY.
4. Place the DEFCON Security Base Plate cover as shown and slide it
to the left or right to secure it in place.
5. Insert your DEFCON SCL.
® SCL serialised combination cable lock
9