Precautions During Use; Important Safety Instructions - Ibanez IBZ10G Manual Del Usuario

Foreword
Thank you for purchasing the Ibanez IBZ10G guitar amplifier. Read this manual
thoroughly prior to using your amplifier in order to get the most out of the functions
available. Ensure that this manual is also stored in a safe place.
Features
The IBZ10G amplifier head provides 10W of output and is mounted with a powerful 6.5-
inch Ibanez original Power Jam speaker to provide high-quality sound and easy operation.

Precautions during use

• Do not subject the amplifier to shocks by dropping, etc., or treat it roughly in any
way.
• Place the amplifier carefully in a stable position. The sound from the amplifier will
vary depending on how and where it is set up.
• Do not use or store the amplifier in locations where it is subject to direct sunlight or in
environments that experience extreme temperatures and humidity levels.
• Reduce the volume to '0' or switch off the power supply when connecting the guitar
shielded cable and the effects or other cables required for external connection. Note
that the noise generated when plugs are inserted and removed may cause severe
damage to the equipment.
• To avoid the danger of fire, do not place containers of liquid on the amp.
• When you are not using it, leave the power turned off. As long as the IBZ10G is
connected to an electrical outlet, it is not completely insulated from the power supply
even if the power switch is turned off. If you will not be using the IBZ10G for an
extended period, leave the power cable disconnected.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufac-
turer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
4
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING - To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
• "The Lightning Flash with arrowhead symbol within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage" within
the product enclosure that may be of sufficient magnitude to constitute a risk of
shock to persons".
• "The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product".
Names and functions for each part
1. INPUT jack
The input terminal of standard 1/4" jack. Make the connection from the electric guitar
with a guitar shielded cable.
2. OVERDRIVE ON/OFF switch
This is used to switch the over drive ON/OFF.
3. OVERDRIVE - GAIN control
This adjusts the gain (level of overdrive distortion) when overdrive is ON.
The amount of distortion will be reduced to produce a clear and individual sound
when the control is lowered, and the distortion amount increased to provide
higher levels of sustain when it is raised.