Function as interface
Function of outputs
The output function is used together with an intelligent building instal-
lation (IBI) to get feedback from KLF 200. The output function gives the
user feedback as to whether an action has been executed, for instance
if the skylight has been closed. As feedback, the built-in output relay is
activated for 2 seconds.
Intelligent building installations
io-homecontrol
®
installations (IBI). The IBI system must include an output module with
one or more programmable outputs. When the outputs from the IBI have
been connected to the input terminals on the interface, the relevant
io-homecontrol
®
outputs it is possible to control both function
io-homecontrol
®
OUTPUT
A B C D E
OUTPUT A connects to INPUT 1 and 2.
OUTPUT B connects to INPUT 3 and 4 etc.
22 VELUX
®
products can be combined with most intelligent building
products can be controlled via the interface. With two
product or a group of io-homecontrol
INPUT
1
2 3 4
(A)
Max 30 V AC/DC
Max 50 mA
and function
5 6 7 8 9 10
(B)
(C)
A B C D E
in an
products.
®
INPUT
(D)
(E)
ENGLISH