Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS (CONTINUED)
Lubrication
This unit contains no oil.
Before operating compressor, fill to
the center of the sight gauge (see Figure 4).
Using any other type of oil may
shorten pump life and damage
valves.
QUICK REFERENCE
Recommended Oil (2 Options)
FSC-1000A ISO-100 Premium Reciprocating Compressor
Lubricant
1 quart part number FSC-1000A-1
12 quart case part number FSC-1000A-12
For generic option use 10W30
Oil Capacity
Approximately 175 mL (6 oz.)
THIS UNIT IS SHIPPED WITHOUT
OIL! Follow lubrication instructions
before operating compressor.
Use oil shipped with the compressor.
Do not use regular automotive oil such as
10W-30. Additives in regular motor oil can cause valve
deposits and reduce pump life. For maximum pump life, drain
and replace oil after the first hour of run time.
The compressor pump takes approximately 175mL (6 oz.) of
oil. The sight glass, located on the crankcase portion of the
pump, is used to determine proper oil level. Fill the crankcase
with oil until the level is in the middle of the sight glass. Avoid
overfilling by adding oil gradually and checking the oil level
with the sight glass several times. Add enough oil to reach the
"max" level on the sight glass. Proper oil level is illustrated in
Figure 4.
Figure 4 - Proper Oil Level
8
Max.
Min.
Publicidad
Tabla de contenido
