Mechanical Installation - Lenze ETHERNET Powerlink Instrucciones Para El Montaje Y El Funcionamiento

2

Mechanical installation

ƒ Plug the communication module onto the basic device (here: 8200 vector).
ƒ Screw the communication module to the basic device to ensure a good
PE connection.
)
Note!
For the internal supply of the communication module through the 8200 vector
frequency inverter, the jumper in the interface opening must be adapted
(see fig. above). Please observe the notes (^ 28).
EDK2191DB DE/EN/FR/ES/IT 1.0
Mechanical installation
l
2
2102LEC014
25