Omega OS150 USB Guia Del Usuario página 4

optionS
The following options are available. Options are factory installed and must be ordered
with the OS150-USB sensor.
Air/water cooled housing
Certificate of calibration
Longer cable (30 m max.)
optical cHart
The optical chart below indicates the nominal target spot diameter at any given dis-
tance from the sensing head and assumes 90% energy.
Distance: Sensor to object (inches)
0
0.6
15
0
Distance: Sensor to object (mm)
OS151-USB
inStallation
The installation process consists of the following stages:
Preparation
Mechanical installation
Electrical installation
Please read the following sections thoroughly before proceeding with the installation.
preparation
Ensure that the sensor is positioned so that it is focused on the target only.
›
4
19.7 39.4 0
3.2
1.9
0.6
D:S 15:1
15
48
82
500 1000 0
Target greater
than spot size
Target equal to
spot size
Target smaller
than spot size
Distance: Sensor to object (inches)
19.7 39.4
1.9
1.2
D:S 30:1
32
48
500 1000
Distance: Sensor to object (mm)
OS301-USB
Sensor
BEST
GOOD
INCORRECT
Background
Distance: Sensor to object (inches)
0 3.9
0.6
0.2
5
15
0 100
Distance: Sensor to object (mm)
OS801-USB
7.9
0.6
15
200