Safety Alert Symbols; General Information; Personnel's Qualification; Precautions, Warnings - SANIC 3P Serie Instrucciones Para La Instalacion Y Mantenimiento

1 - Safety Alert Symbols

2 - General Information

PLEASE READ THIS INSTRUCTIONS MANUAL THOROUGHLY AND CAREFULLY
AND UNDERSTAND ITS CONTENTS BEFORE INSTALLING THE SANIC FILTER.
- The information in this instruction manual is subject to modifications without prior
notice and is not binding on the manufacturer ATLAS FILTRI S.R.L.
- Keep the instruction manual for future reference.
Manufacturer's identification: See page 1
Product Identification:
The label must not be removed, tampered, hidden, covered, or changed.
If the label on the product is missing or the operational conditions on the label are not
legible, DO NOT INSTALL the filter and contact SANIC or ATLAS FILTRI Authorized
Distributors or contact the manufacturer by e-mail at info@atlasfiltri.com.
The values of the maximum working temperature and the maximum working
pressure shown in the label affixed to the filter housing are intended as maximum
working parameters and must not be exceeded under any circumstance.
The filter cartridge intended to operate with this filter housing may not be included in
the package and, if not included, must be purchased separately.
Carefully choose the filter cartridge fit for the selected filter housing in the literature
and pamphlets made available by SANIC or ATLAS FILTRI Authorized Distributors or at
www.atlasfiltri.com.
Use only original SANIC Filter Cartridges. The use of cartridges different from the original
ones voids the warranty.

3 - Personnel's Qualification

ONLY QUALIFIED AND LICENSED PERSONNEL MAY PERFORM INSTALLATION,
SERVICE AND MAINTENANCE of the SANIC FILTERS.

4 - Precautions, Warnings

READ ALL INSTRUCTIONS AND PRECAUTIONS BEFORE INSTALLING AND USING
YOUR SANIC PRODUCT.

5 - Installation

Refer to Fig. A, B and C for installation directions.
- Before installation, check if the plumbing system has been set-up according to the
applicable plumbing code.
WARNING SIGN: indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury. It highlights conditions that are a serious
risk for personal safety.
CAUTION SIGN: Indicates a potentially hazardous
situation which, if not avoided, may result in a minor or
moderate injury, and to alert against unsafe practices.
NOTICE SIGN: Alerts you to pertinent facts and
conditions
A label carrying product identification, serial number,
production batch is applied on the package of the
product. An additional label describing maximum
working pressure and maximum working temperature
is applied to the filter housing.
2