RAWLINK 36763 Manual De Instrucciones página 27

Power button (1)
Function 1: on / off button
Press and hold this button to switch the
device on and off .
Function 2: night lights
In standby, short video and photo mode this
button is used to switch the night lights on
and off .
OK button (2)
Function 1: Start / stop video recording
In standby mode, press OK to start video
recording. Press OK again to stop video
recording.
Function2: Camera
In photo mode, press OK to take a picture.
Function 3: Files playback function
In playback mode, press OK to play and
pause video � les.
Function 4: Con� rm function
Saves and action in menu options
Menu button (3)
Press the menu button to enter the video
settings menu in standby mode. In settings
mode, move to options using the Up and
Down buttons and press OK to select the
options. Press menu to exit.
Press the menu to enter camera settings
menu in photo mode. In photo settings
mode, move to options using Up and Down
buttons and press OK to select the options.
Press menu to exit.
Down button (4)
Function 1: Use this button to move down
the menu.
Function 2: Increase volume. Press and hold
to fast forward.
Function 3: Use this button to switch front /
rear / dual lens image on the screen.
Up button (5)
Function 1: Use this button to move up the
menu.
Function 2: Decrease volume. Press and hold
for rewind.
Function 3: In video mode, press brie� y to
switch the microphone on and off .
Mode button (7)
In video mode, press the Mode button to
enter camera mode.
In camera mode, press the Mode button to
enter playback mode.
In playback mode, press the Mode button to
enter video mode.
Micro SD card slot (11) (not included)
(1) Requires a TF card above class 10
(2) Inserting and removing the TF card:
1. Push the card into the slot in the right
direction until the card is in place.
2. When removing the card, press the card
slightly, then take it out.
Please note:
1. Do not insert or remove the card when
the device is working.
2. Note the correct direction to insert the
card. Inserting the card incorrectly may
damage it.
3. Once the card is inserted, the device will
select the card as the default storage
device. Any data already on the card may
not be read.
4. If the card is not compatible with the
device, try reinserting the card again.
5. Maximum capacity supported: 32 GB
We recom mend using a 32 GB memory
card.
GB
27