To Program
Automatic Brew
NOTE: White LED comes on to indicate PROGRAM
is activated. White LED light goes off when unit begins
to brew at preprogrammed time.
1. Choose a brew option.
2. Press and hold PROG button until HOUR light flashes.
3. While pressing PROG button, press the
TIME button to select the desired brew
time. Release PROG button and time will
be set.
4. Programmed time will be stored and the
current time will be displayed.
5. Press and release PROG button again
to activate automatic brew. PROG
light comes on.
Tips for Best-Tasting
Coffee
• All coffees are made from either arabica beans or robusta beans,
or some combination of both. Arabica beans are slightly more
expensive, but tend to produce better-tasting coffee.
• Ground coffee will become stale much faster than whole beans.
If buying preground coffee, choose a package with the latest
expiration date or a smaller quantity.
• Try to use freshly ground coffee within about a week of grinding.
• Using filtered water or bottled water will yield better-tasting
coffee than tap water.
• Make sure your coffeemaker is clean. See "Care and Cleaning"
directions on page 7.
• If overflow occurs, use slightly less grounds or less beans.
7