Checking The Heated Car Seat Cushion And Product Contents - autoXS 16478 Manual Del Usuario

− Discontinue using the heated car seat cushion if it is
cracked, chipped or deformed. Only replace damaged
parts with corresponding original spare parts.
− Do not insert needles or pointy objects in the heated car
seat cushion.
− Do not operate the heated car seat cushion near heat
sources, open flames such as candles or in direct sunlight
to prevent overheating.
− During operation, make sure that the 12 V plug is securely
plugged into the 12 V on-board power socket and that
it is free of dirt. If there is no sufficient contact between
the 12 V plug and 12 V on-board power socket, the vehicle
vibration may cause the power supply to switch on and off
at short intervals. This may result in overheating.
− Do not switch the heated car seat cushion on when it is
folded up or pushed together.
− Do not fold or crease the heated car seat cushion.
− Do not place any heavy objects like a suitcase on the heated
car seat cushion.
Checking the heated car seat cushion
and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage
the heated car seat cushion.
− For this reason, be very careful when opening it.
1. Take the heated car seat cushion out of the packaging and check whether
the heated car seat cushion or the individual parts exhibit damages. If this is
the case, do not use the heated car seat cushion. Contact the manufacturer
at the service address specified on the warranty card.
2. Check to make sure that the delivery is complete (see fig. A).
AFTER SALES SUPPORT
800 222 0999
USA

Checking the heated car seat cushion and product contents

office@walsergroup.com
USA
13