Operating The Heated Car Seat Cushion; Cleaning - autoXS 16478 Manual Del Usuario

3. Fix the heated car seat cushion by anchoring the tension straps
attachment hooks
4. Make sure that the connector cord is not caught anywhere.

Operating the heated car seat cushion

Only use the heated car seat cushion while the motor is running.
1. Connect the 12 V plug
2. Now select the desired heat setting by setting the sliding switch
to "LOW" (108 – 122 °F/42 – 50 °C) o "HIGH" (117 – 131 °F/47 – 55 °C).
The power LED will light up.
3. Switch the heated car seat cushion off by setting the sliding switch to "OFF".
4. Then pull the 12 V plug out of the 12 V on-board power socket.

Cleaning

NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short
circuit.
− Never immerse the heated car seat cushion in water.
− Make sure that no water penetrates the heated car seat
cushion.
NOTICE!
Risk of damage!
Improper handling of the heated car seat cushion may result
in damage.
− Do not use any aggressive cleaners, brushes with metal
or nylon bristles, sharp or metallic cleaning utensils such
as knives, hard scrapers or similar utensils. They could
damage the surfaces.
− Never put the heated car seat cushion in the washing
machine.
AFTER SALES SUPPORT
800 222 0999
USA
6
to the seat cushion.
7
to the 12 V on-board power socket.
Cleaning
5
and
2
either
office@walsergroup.com
USA
15