Clock Setting - Daewoo International DRP-18 Manual De Funcionamiento

AM TUNING STEP
Press and hold the [BASS] until A10 / A9 shows on
the display to select 9K / 10K AM tuning step.
Note: Factory default is 9Khz AM tuning step.

CLOCK SETTING

Press the [TIME] button and notice the hour flashing,
then press the [-/+] button to adjust the hour. Press
again the [TIME] button to confirm and go into minute
setting, then press the [-/+] button to adjust the
minute while it is flashing.
12 HR / 24 HR SETTING
In radio off mode, press and hold the [TIME] button
for about 5 seconds and notice the H12 or H24
showing on the display to select your desired clock
format.
KEY LOCK
Push the key lock switch to the right side with the key
symbol appearing on the display to lock all
keys/buttons. Push it back to the left side with the
key symbol disappearing on the display to unlock.
BACK LIGHT
The back light will auto turn ON to illuminate the LCD
when you press any buttons. It will last for about 10
seconds.