Required Menu Settings - KERN FEJ-A07 Manual De Instalación

3 Required menu settings

For further information on menu settings please refer to the operating instructions
supplied with all balances.
Default settings:
Additional functions
Display conditions of the
tolerance marker
Tolerance range
Number of limiting points
Assessment
Signal at limit 1
Signal at limit 2
Signal at limit 3
Signal at limit 4
Signal at limit 5
Display of
Results
Output setting
14
[r SEL 2 ]
[21. CQ. 1 ]
[22. L . 1 ]
K
[23. P 2 ]
1
[24. TXP. 1]
[25. BW.K 0]
[26. BW.2 0]
[27. BW.3 0]
[28. BW.4 0]
[29. BW5 0]
[2A. LG 1 ]
[2B. R.Q.m. 1]
Tolerance weighing active
Tolerance marker is always
displayed, even if standstill
control is not yet displayed.
Tolerance marker is displayed
for the whole range.
2- Limiting points (+/OK/-)
Evaluation for absolute values
No signal at limit 1(-)
No signal at limit 2(Ok)
No signal at limit 3(+)
No signal at limit 4
No signal at limit 5
Display via +, OK or -
Continuous output
FEJ-A07-IA-defsi-0610