Parts List Including Connecting Hardware - Chauvet DJ CH-02 Guía De Referencia Rápida

CH-02 QRG

Parts List Including Connecting Hardware

Quantities Parts (size)
8 hex head bolts (M10)
8 wing nuts (M10)
8 hex nuts (M10)
15 washers
5 small hex bolts (M6)
small Phillips-head
18
bolts (M6)
23 small hex nuts (M6)
6
1
3 T-braces
2 side bars
1
4 small support bars
1 tripod assembly
1 hex wrench
Used at attachment points for fixtures
on the T-bar and side bars
Used in combination with M10 hex bolts
Used in combination with M10 hex bolts
Used in combination with M10 hex bolts
Used in combination with small hex nuts
to tighten braces
Used in combination with small hex nuts
to tighten braces
Used in combination with small hex and
Phillips-head bolts
Braces for T-bar and side bars
braces
(takes 2 small bolts and nuts)
Brace for the bottom of the T-bar
brace
assembly (takes 3 small bolts and nuts)
Braces for T-bar and side bars
Used in the side bar assembly
T-bar Used in the T-bar assembly
Used in the T-bar and side bar
assemblies
Tripod portion of the CH-02
(pre-assembled)
Tool for adjusting the small hex bolts
The tripod section comes assembled; however, the T-bar and side bars
require assembly. For details, see
Guide sections.
Description
Assembly Instructions
4
EN
Diagram
and Assembly