Setup Instructions; Charge Battery - General TOOLSMART TS07 Manual Del Usaurio

SETUP INSTRUCTIONS

CHARGE BATTERY

During charging, the TS07 can be used as a flashlight, but not
as a WiFi video camera. Charging may take up to eight hours.
To charge the battery:
1. Power off the TS07 by pressing and holding the
buttons (Callouts F and G on page 5).
2. Unscrew and remove the battery compartment
(Callout J).
3. Remove and discard the clear plastic battery activation
disc.
4. Insert the cylindrical plug end of the included USB cable
into the jack exposed by unscrewing the head (Callout C),
and the full-size (standard-A) USB plug at the other end
into a USB port of your computer or a socket of a USB
AC power adapter.
If you do not already own a USB AC power adapter (most
smartphones include one), you can purchase one on-line
or at many retail stores for less than $5. Be aware that
"trickle" charging the TS07 through a USB port of your
computer will take much longer than charging it from an
AC outlet.
5. During charging, the Wi-Fi indicator LED (Callout I)
will blink/flash green.
6. When the battery is fully charged the LED's color will
switch to solid green.
7. Replace the flashlight/camera head cover and hand-
tighten it.
6
and