Operating & Maintenance Tips; Warranty Information - General TOOLSMART TS07 Manual Del Usaurio

OPERATING & MAINTENANCE TIPS
When both LEDs on the Flashlight Inspection Camera begin
flashing green to indicate that that the battery is becoming
low on charge, charge the battery by connecting the TS07 to
a power source, using the "Charge Battery" Setup
instructions on page 6 as a guide.
The TS07 is not equipped with an Auto Power Off (APO)
feature that would automatically power off the unit after a
fixed period of inactivity. To avoid having to recharge the
battery often, remember to power off both the flashlight and
the WiFi camera head when you are finished using them.
When left in the Flashlight Inspection Camera for an extended
period of time, the Lithium-ion battery may corrode and
release toxic chemicals capable of permanently damaging the
unit. Remove the battery when preparing the TS07 for long-
term storage, and also when you do not intend to use it for
weeks or months.
Use an anti-static microfiber cloth to clean the TS07 housing
and other structures. Never use abrasive or chemical cleaning
agents.

WARRANTY INFORMATION

General warrants its instruments and accessories, and digital
tools products against defects in material or workmanship for
one year from the date of purchase unless otherwise stated
on the packaging, manual, and/or marketing materials.
General also warrants its non-digital tools products against
defects in material or workmanship on a limited lifetime term.
General will replace or repair the defective unit, at its option,
subject to verification of the defect.
9