Wellstore Jet Pool Cleaner Instrucciones De Uso página 2

ENGLISH
Dear Customer,
Thank you for choosing our Jet Unit to clean your pool. We hope that you will
enjoy using your new Jet Unit to maintain your swimming pool for years to come.
The Jet Unit is the only fully automatic robotic pool cleaner with a powerful jet drive
propulsion system. Before you begin to use the cleaner, please take a few
minutes to carefully read the Operator Instructions.
Again, thank you for choosing our Jet Unit.
DO NOT SWIM WHILE CLEANER
IS IN USE
1. fuse
2. transformer cable plug
3. transformer 230 V ~ 50Hz
4. power switch ON/OFF
5. socket
6. timer
7. floating cable plug
8. floating cable
1
9. body
10. wheel
11. handle
12. side plate
13. jet valve housing
14. jet outlet
15. lock pin
2
3
4
10
8
7
5
6
WARNING
Read all safety instructions carefully and keep for later reference.
Observe all warnings and instructions marked on power supply and cleaner.
Keep power supply away from heavy rain or placed in puddles of water.
Use only the power supply that was supplied with your cleaner. If there is a
question, consult your local dealer or service center.
The unit must be supplied through a residual current device (RCD) having a rated
residual operating current not exceeding 30 mA.
The connection to the branch circuit should be consistent with the local and
national wiring rules (electrical code).
Do not use your power supply if:
(1) Power cord is damaged or frayed.
(2) The power supply had been dropped in the pool or exposed to heavy rain.
(3) If the power supply has a broken socket.
Please consult your dealer or qualified service center for help.
Do not attempt to repair broken power cord or power supply. Contact your dealer
or service center.
Mishandling of the unit can result in leakage of lubricants.
9
11
12
2
13
14
15
1