Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation Instructions
Using the music playing function:
1.
Plug the Bluetooth receiver 3.5mm head into your vehicle's FM radio or home speaker auxiliary
port.
2.
Long press and hold on the button for 5 seconds, the LED light begins to flash and prompt with
"Power on"
3.
Turn on your Bluetooth enabled devices and search new device named "BT-06", then pair with
this unit.
4.
Turn on your music then you can enjoy the crystal audio sounds.
5.
Press MFB once to Play/Pause if you need it.
Using the hands-free function:
1.
Press MFB once to Answer/Hang off the phone call when there is incoming call.
2.
Press MFB and hold 2 seconds to reject the phone call.
3.
Press MFB twice to redial the last phone call.
4.
Press MFB and hold 2 seconds to active Siri (only iOS), release when the beep is heard.
5.
Press MFB and hold 2 seconds during conversation so as to hear the call with the BT-06 or the
Phone.
Charging the Bluetooth Receiver
1.
When the battery power is low, the relative prompt will appear and its status will also display on
your phone (iSO/Android).
2.
It starts the charging when two parts hooked, plug the USB adapter to charging port, and it will be
fully charged within 2.5 hours.
! Cautious: This device can't work while charging.
Quick Guide:
Power on
Power off
Play/Pause music
Answer call
End call
Redial call
Ignore call
Activate Siri
Switch phone calls between BT-06 and Phone
Hold current call & answer the coming call
Standby
Press MFB and hold for 5 seconds until flashing
and prompting you with «Power on»
Press MFB and hold for 6 seconds until prompt
«Power off»
Press MFB once during music playing
Press MFB once when there is incoming call
Press MFB once during call
Press MFB twice while standby
Press MFB and hold for 2 seconds during call,
release when the beep is heard
Press MFB and hold for 2 seconds, release
when the beep is heard
Press MFB and hold for 2 seconds during
conversation
Press MFB twice during conversation
Switch to standby automatically after 2 minutes
no working
EN
Publicidad
Tabla de contenido
