Sartorius MD8 Airscan 16746-01-SHB Serie Instrucciones De Instalación página 15

Sampling Head in Controlled Areas
12
11
10
9
Fig . 8: Sampling head set up in a controlled area, connected by a PVC hose; exhaust channeled into
non-controlled area (example)
Pos. Designation
1 Exhaust line
2 Adapter
3 Sterile barrier
4 TC 50 .5 adapter on single-level
hose nozzle DN 25 adapter
5 Adapter or connector for
Tri-Clamp connection
6 Hose
7 Hose adapter
8 Sterile filters
9 Angle connector
10 Tri-Clamp (TC 50 .5) adapter on
bayonet
11 Filter adapter
12 Filter
8 7 6 5
Description
PVC or silicone hose
TC 50 .5 adapter on hose nozzle
For example: Wall of a sterile isolator
Is inserted in the air outlet .
Connects the Tri-Clamp connection of the
sampling head to silicone hose .
PVC hose
PVC hose adapter
For example: Sartofluor
sides with TC 50 .5
Connects Tri-Clamp (TC 50 .5) adapter to
bayonet and sterile filter .
Mount with bayonet connection
Type: Adapter for gelatine membrane
filters (GMF)
Type: Gelatine membrane filter (GMF)
MD8 Airscan Sampling Head Installation Instructions
Installation
4 3 2 1
capsule on both
®
15