Switching On And Off - Flex BW 18.0-EC Instrucciones De Funcionamiento

Instruction manual
Attaching the reducing nozzles
Mounting on the bayonet connection
1. Attach the adaptor to the bayonet
connection by turning lightly in anti-
clockwise direction.
2. Check that the adapter is securely
seated.
3. Fit the relevant reducing nozzle.
Detaching
1. Remove in reverse order.
Mounting on the air inlet
NOTE
The adapter is mounted on the air inlet to
extract air.
1. Fit the adapter on the air inlet.
2. Fit the relevant reducing nozzle.
Detaching
1. Remove in reverse order.
10

Switching on and off

CAUTION
Ó Never direct the nozzle of the power tool
at other persons or yourself.
Ó Use personal protective equipment:
safety goggles, ear defenders and also
a respirator (or breathing protection) if
dust is agitated during operation of the
power tool. It is also recommended to
wear suitable footwear, long trousers and
gloves while working with the power tool.
Ó Keep hair and clothing away from
openings and moving parts.
Brief operation without engaged
switch rocker
1. Press and hold down the switch.
2. To switch off, release the switch.
Continuous operation with engaged
switch rocker
1. Press and hold down the switch (1.).
2. To lock into position, hold down the
locking button and release the switch (2.).
BW 18.0-EC