Configuration Menu - Master audio JOKER Serie Manual Usuario

Master Audio
Limiter: Adjust the limiter Threshold, using UP
and DOWN arrows. Default setting is 0dB
(maximum power)
Once you are finished, press SELECT.
Polarity (only for Subwoofers): select between
positive and negative
inversion). It provides a very useful feature to
quickly align the
application.

CONFIGURATION MENU

Entering the configuration
following options can be set:
ECO Mode: Under this option, the ECO mode
can be disabled or enabled with different sleep
times.
Under the ECO mode, the system will
continuously analyze the input signal. If no
input signal is present after the number of
minutes selected in this option, the system will
go in a low power consumption mode
(standby). This condition will be indicated by a message in the LCD.
When the audio signal is present again, the system will wake up and continue playing
until the input signal is gone the next time.
If the Eco mode is selected, the word Eco will display in the main screen.
IMPORTANT: The system needs about 2
seconds to wake up from the low power
consumption mode. It is not recommended to
use it for time-critical applications.
Front LED: Joker active cabinets are equipped
with a front led, that lights up when the cabinet
is powered on.
The behaviour of the front LED can be changed here:
Off: The front led remains always off
On: The front led remains always on
On when Limiting: The front led is normally off and lights up when either of the
limiters are active.
Off when Limiting: The front led is normally on and turns off when either of the limiters
is active (the default setting):
IMPORTANT: In the default setting, the Font Led will be lit Off when either of the
limiters is active.
Joker Series (Active). Version 1.4
polarity (180º
subwoofers in one
menu,
Limiter
Polarity
Positive
Negative
Back
the
ECO Mode
Disabled
Enable in 1m
Enable in 10m
Enable in 30m
Back
Front LED
Off
On
On when Limiting
Off when Limiting
Back
-3.0 dB
.
.
.
Jan14
29