Master audio JOKER Serie Manual Usuario página 3

Master Audio
1. INTRODUCTION
1.1. General
Master Audio would like to thank you for your confidence in our Joker Series. We
suggest you to carefully read the following instructions in order to obtain the best
results in performance.
1.2. Features and presentation
JK26A
- Self-powered acoustic system
- XLR electronically balanced input & XLR parallel output
- AC PowerCon input
- 200 W class D amplifier for low-mid range
- 30 W class AB amplifier for high range
- 24-bit AD/DA converters, 48kHz sampling rate
- Self amplifier diagnostics: output power, clipping
- DSP Controls (delay, volume, polarity, presets and limiters)
- 2x6" neodymium woofers with Kevlar cone and 1.5" voice coil
- 1" neodymium Tweeter with Titanium diaphragm
JK10A
- Self-powered acoustic system
- XLR electronically balanced input & XLR parallel output
- AC PowerCon input
- 600 W class D amplifier for low-mid range
- 100 W class D amplifier for high range
- 24-bit AD/DA converters, 48kHz sampling rate
- Self amplifier diagnostics: output power, temperature, clipping
- DSP Controls (delay, volume, polarity, presets and limiters)
- 10" neodymium woofer with 2.5" voice coil
- 1.4" PETP diaphragm driver
- 50º to 100º (H) x 55º (V) asymmetrical dispersion horn
JK12A
- Self-powered acoustic system
- XLR electronically balanced input & XLR parallel output
- AC PowerCon input
- 600 W class D amplifier for low-mid range
- 100 W class D amplifier for high range
- 24-bit AD/DA converters, 48kHz sampling rate
- Self amplifier diagnostics: output power, temperature, clipping
- DSP Controls (delay, volume, polarity, presets and limiters)
- 12" woofer with 3" voice coil
- 1.75" PETP diaphragm neodymium driver
- 50º to 100º (H) x 55º (V) asymmetrical dispersion horn
Joker Series (Active). Version 1.4 Jan14
3