Operating Instructions - Kitchen Living HL-2070 Manual Del Usuario

High Speed Blending and Mixing System

Operating Instructions

Using the High Speed Blending and Mixing System
1.
unplugged from the electrical outlet.
2. Fill the small or large cup with the food you wish to chop or blend.
3. Ensure that the gasket (silicon ring), located on the inside bottom edge of the blade
onto the top of the cup until secure.
4. Turn over the chopper/blender assembly so that the blades are on the bottom. Then
attach the assembled chopper by aligning the three tabs on the outside of the cup
with the three notches on the top inner edge of the power base.
5. Plug the product into an appropriate electrical outlet.
6. To begin processing food, press down and turn the cup assembly counterclockwise.
CAUTION: To prevent the motor from overheating, limit continuous operation to
5 seconds at a time.
7. To stop processing, press down and turn the cup assembly clockwise. Wait until
the blades have stopped completely before lifting the cup from the power base.
8. T
the faucet, taking care with the sharp blades.
AFTER SALES SUPPORT
866-235-5029
USA
MODEL: HL-2070, PRODUCT CODE: 92680, 07/2015
USA
Operating Instructions
10
serviceusa@tempo.org