Healthteam Paraffin Heat System Operation; Filling The Paraffin Heat System - HealthTeam PA2293 Manual Del Usuario

HEALTHTEAM PArAffin HEAT SySTEM OPErATiOn

Filling the Paraffin Heat System

1. Ensure that the unit is on a level, flat, sturdy, heat resistant sur-
face.
2. Remove the lid and all plastic packaging inside the unit.
3. Open the one lb. paraffin wax pellets or blocks and place half
of the contents in the unit. Add the remaining when these have
melted. Do not overfill the unit. Do not fill the system past the
maximum fill line indicated.
4. Plug the unit into a properly grounded, 120 volt, 60 cycle single
phase power outlet. The red light will illuminate to indicate that
power is being transferred to the unit and that the system is in
the ON position.
5. Place the lid back onto the unit to retain heat.