5. HARDWARE REQUIREMENTS
To use the DANTE Controller, the following
items are required:
You must have access to a computer running
Microsoft Windows XP (Service Pack 3 or higher),
Vista (Service Pack 1 or higher), or Windows 7.
The computer must also have an Ethernet port,
which you use to connect the computer to the DSS
device via an Ethernet network through a shield-
ed CAT 5 (e) cable. This connection is necessary
for using the DANTE Controller software to load
configuration information into the device and also
for monitoring detailed status information. Note
that some status information is visible on the
hardware itself.
Minimum requirements for running
DANTE Controller
•
Windows XP (32-bit) or Vista SP1 (32 or 64 bit),
7 (32 or 64 bit), or 8 (32 or 64 bit)
•
PC with 1.6 GHz single Core Processor
•
1 GB RAM
•
1 GB available hard disk space
•
Display Resolution: 1024*768
•
Ethernet adapter: 100baseT
Recommendations for Best Performance
•
Windows7 (32 or 64 bit)
•
PC with mid-level processor @ 2 GHZ mul-
ti-core or better (for example, Intel i3, AMD
Athlon II)
•
2 GB RAM
•
2 GB available hard disk space
•
Display Resolution: 1152*864
•
Ethernet adapter: Gigabit
P. 12
AUDIOLAB Live Snake 16.8 -
English version