Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTION
HOW TO ACTIVATE IT
When knob (1) is turned to the
OVEN
symbol, the light comes on
LIGHT
• Turn the selector knob (1) to
CLOCK
the
symbol.
• Using the
set the time of day (while
setting, the numbers on the
display will flash)
• To select a cooking function
COOKING
use (selector knob 2)
TIME
• Turn selector knob 1 to the
symbol
• Set the cooking time using the
and
buttons (while
setting, the numbers on the
display will flash)
• Select a cooking function
END OF
(selector knob 2)
COOKING
• Turn the selector knob to the
symbol.
• Set the end of cooking time
using the
(while setting, the numbers
on the display will flash)
• Turn selector knob 1 to the
ALARM
symbol.
• Set the cooking time using the
and
buttons (while
setting, the numbers on the
display will flash)
• Turn the selector knob 1 to the
CHILD
symbol. The indicator light
SAFETY
will flash.
• Press the
at the same time, for three
seconds.
• The setting is confirmed when
the light stops flashing.
EN
HOW TO SWITCH IT OFF
• Turn the selector knob to the
position
and
buttons,
• When the cooking time is up,
the oven will switch itself off.
If you need to stop it before
then, the oven must be
switched off, or the cooking
time must be turned to 00:00.
(selector 1 to symbol
and use the
and
buttons)
• At the pre-set time the oven
automatically switches itself
off. If you need to stop it
before then, switch the oven
off by turning the selector
and
buttons
knob 2 to the
• When the set cooking time is
up, the oven will automatically
switch itself off. If you need to
stop it before then, you must
turn the set time to 0 (selector
knob 1 on
and then use
the
and
buttons)
• Press buttons
together for three seconds.
The light flashes.
and
buttons
23
WHAT IT DOES
• Allows you to regulate the
time shown on the oven clock
• Allows the end of cooking time
to be stored in the memory.
• When the cooking time has
been set, turn selector knob 1
to the
symbol to display
the time of day.
,
• To display the programmed
time turn selector knob 1 to
the
symbol.
• Allows the end of cooking time
to be stored in the memory.
• When the cooking time has
been set, turn selector knob 1
to the
symbol to display
symbol.
the time of day.
• To display the programmed
time turn selector knob 1
to the
symbol.
• Provides an audible alarm
signal (for a few seconds)
at the end of cooking time.
and
• The oven settings cannot be
altered (even when the knobs
are accidentally adjusted)
WHAT IT IS FOR
This function is useful for checking that the oven
is fully operational.
• Using the
and
buttons, set the time of day
(while setting, the numbers on the display will flash)
NB: Set the clock immediately after installing
the appliance or after an interruption to the
power supply (this is shown by 12:00 flashing
on the display).
• When the set cooking time is up the oven switches
itself off automatically and for a few seconds
an alarm sounds.
• This function is used typically used with 'cooking
time' function. For example if the dish has to be
cooked for 45 minutes and needs to be ready by
12:30, simply select the required function, set the
cooking time to 45 minutes and the end of cooking
time to 12:30.
Cooking will start automatically at 11:45 (12:30
minus 45 mins) and will continue until the pre- set
end-of-cooking-time, when the oven will switch
itself off automatically.
• Useful as a reminder
• This function works independently of the oven
(it can be used even when the oven is not
working)
• Operates even when the oven is not on preventing
it from being inadvertently switched on.
• Is operational when the oven is on and prevents
any alterations to the settings (through accidental
turning of the knobs)
NB: the oven can still be switched off by
turning selector knob 2 to position 0.
24
EN
Publicidad
Tabla de contenido
