Recharging The Battery - Wagan Tech Brite-Nite 2 Million LED Manual De Usuario

4. If "LOW" is selected, pull the Spotlight Power trigger to turn on the halogen
light. Use the trigger lock to keep the spotlight running continuously.
5. The unit will not turn off automatically: When the light output is low, turn off the
spotlight and charge immediately to maintain the battery. Draining the battery
too low will shorten battery life.
6. To prevent overheating, do not use the spotlight on the HIGH setting for more
than 40 minutes consecutively. Allow to cool before reuse.

RECHARGING THE BATTERY

1. Slide the switch at the back to the "CHARGE" position, revealing the charging
port.
2. Check the Battery Level Indicator LEDs at the back of the light to see the
charge level while charging.
3. To use the home AC charger, insert the end of the charger into the spotlight
charging socket, and plug the other end into an AC wall socket. Please be
sure to use only with an outlet of the correct voltage.
4. Only charge with the supplied charging adapters.
5. Do not turn on spotlight while charging.
6. The battery will be fully charged about an hour after the green Battery Level
Indicator light is lit. It takes roughly 8–10 hours to charge with the AC adapter,
and 4–6 hours to charge with the DC adapter (estimated times: please see
the Battery Level Indicator for actual charge level).
MAINTENANCE
•
Keep the spotlight clean and dry.
•
The lifespan of the internal battery depends on how well it is treated. It is
advisable to recharge the spotlight after use, in order to extend battery life.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2012 Wagan Corporation. All Rights Reserved.
3