Upright Operation - NUGENI VAC+ VAP010 Manual De Usuario

Upright Operation

Assemble Upright Vac
Attach Handheld Unit to Mopstick
1. Insert intake port of
handheld unit into
vacuum intake on
mopstick as shown.
1
Set Up Charging & Storage Dock
1. Connect power adapter to charging port
and insert plug securely into outlet socket.
2. Charge indicator light will illuminate
when successfully connected:
> connected to power: solid blue light
3. Place upright vac onto charging dock,
ensuring alignment of metal contacts.
4. Power button light on handheld unit will
illuminate when successfully connected:
> charging: blinking green light
> fully charged: solid green light
5. Load hand vac accessories
into dock for storage.
Use
!
WA R N I N G
only the charger provided
to recharge your Nugeni
vacuum. Charge vacuum
with standard electrical
outlet only (120V/60Hz)
12
2. Tilt handheld unit
back and press
firmly to "click"
securely in place.
"CLICK"
2
5
3
To Remove Handheld Unit:
3. Press up and hold
release switch on
back of mopstick.
4. Pull out the handheld
unit to remove.
2
1
3
Note: Full charge requires
approximately 2.5 hours
4
+
mynugeni.com
4