pointed or sharp object, you may quickly
damage the trimmer.
− For this reason, be very careful when
opening the package.
1. Take the trimmer out of the packaging.
2. Check to make sure that all parts are included
(see Fig. A and B).
3. Check whether the trimmer or individual parts are
damaged. If this is the case, do not use the trimmer.
Contact the manufacturer via the service address
indicated on the warranty card.
Basic cleaning
• Remove the packaging material and all plastic wrappings.
• Clean all parts of the trimmer before first use as described
in the chapter "Cleaning and maintenance".
Inserting the battery
Before use, insert the included AA battery
1. Turn the battery compartment cover
at the bottom of the trimmer (see Fig. B).
2. Align the polarities, insert the battery and replace
the battery compartment cover (see Fig. C). Twist
counterclockwise to lock the cover.
3. Make sure the trimmer is working before use by
turning it on using the on/off switch
There should be a whirring sound and the built-in
LED light
should light up (see Fig. E).
2
First use
11
.
12
clockwise
(see Fig. D).
3
15