General Instructions; Faucet Installation - T&S B-1171 Instrucciones De Instalación Y Mantenimiento

General Instructions

Nozzle Installation Nozzle Installation
1. 1. Place no. Place no.16 16 onto no. onto no.20
2. 2. Insert both no. Insert both no.18 18's into each side of no.
and tighten. and tighten.

Faucet Installation

Faucet Installation
3. 3. Shut off water supply and drain lines. Shut off water supply and drain lines.
Drill (4) holes Ø 1" holes into the countertop Drill (4) holes Ø 1" holes into the countertop
with the applicable spacing shown. with the applicable spacing shown.
4. 4. Apply Plumber's Putty to the bottom face of no. Apply Plumber's Putty to the bottom face of no.5. .
Position no.1 into the drilled Position no. into the drilled countertop.
5. 5. Install no. Install no.2 and no. and no.3 on each no.
tighten. Install no.4 if they are to be used. tighten. Install no.
6. 6. Connect water supply to no. Connect water supply to no.1 shanks or no.
if applicable. if applicable.
Sidespray & Hose Guide Installation Sidespray & Hose Guide Installation
7. 7. Disassemble no. Disassemble no.15 15 and insert shank portion into
Screw locknut of no. Screw locknut of no.15
8. 8. Apply Tefl on tape to the threaded end of no. Apply Tefl on tape to the threaded end of no.14
Install into outlet in faucet body. Install into outlet in faucet body.
9. 9. Turn on water supply and check for leaks. Turn on water supply and check for leaks.
20.
's into each side of no.16
countertop.
on each no.1 shank and shank and
if they are to be used.
shanks or no.4
and insert shank portion into the countertop hole.
15 onto no. onto no.15 15 shank and tighten. shank and tighten.
16 16
16
20 20
(optional for (optional for
both inlets) both inlets)
8" (for B-1172)
4" (for B-1171)
the countertop hole.
14 hose and insert through no. hose and insert through no.15
4
18 18
1, 5 1, 5
countertop countertop
2
1
3
4
4" Min.
for no.15
Ø 1"
Ø 1"
4" (for B-1172)
2" (for B-1171)
15. .
14 14
countertop countertop
15 15