Safety Guidelines; Risk Of Electric Shock - Silvercrest SSM 200 A1 Instrucciones De Uso

Safety guidelines

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power sockets supplying a
►
mains power voltage of 220 – 240 V ∼, 50 Hz .
Arrange for defective power plugs and/or cables to be replaced as
►
soon as possible by a qualified technician or by our Customer
Service Department to avoid the risk of injury .
In event of operating malfunctions and before cleaning the
►
appliance, remove the power plug from the mains power socket .
Always remove the power cable from the socket by pulling on the
►
plug, not on the power cable itself .
Do not kink or crush the power cable, and route the cable so that it
►
cannot be stepped on or tripped over .
Do not expose the appliance to humidity and do not use it outdoors .
►
If liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a qualified
technician .
NEVER take hold the motor unit, the power cable or the power plug
►
with wet hands .
If the power cable or the motor unit are damaged, you must have
►
the appliance repaired by qualified technicians before using it
again .
Do not open the housing of the appliance motor unit . Doing so can
►
lead to risks and also invalidates the warranty .
Disconnect the appliance from the mains power source immediately
►
after use . The appliance is completely free of electrical power ONLY
when unplugged .
Never immerse the motor unit of the appliance in liquid and do
not allow any liquids to enter the housing of the motor unit .
SSM 200 A1 GB │ MT │ 23 ■