En Original Instructions; Declaration Of Conformity; Specified Use; General Safety Instructions - Metabo SM 5-55 Manual Original

en ENGLISH
Original Instructions

1. Declaration of Conformity

We, being solely responsible, hereby declare that
this screwdriver magazine, identified by type and
serial number *1), meets all relevant requirements
of directives *2) and standards *3). Technical
documents for *4) - see page 3.

2. Specified Use

This screwdriver magazine SM 5-55 is intended for
attachment to the Metabo screwdrivers SE 2500,
SE 4000, SE 6000, SE 18 LTX 2500,
SE 18 LTX 4000 or SE 18 LTX 6000. Intended for
processing screws on strips in industrial and
commercial use.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.

3. General Safety Instructions

For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating
instructions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your power tool only together with these
documents.

4. Special Safety Instructions

Hold the device at the insulated gripping
surfaces when carrying out works,
where the tools used can hit concealed power
lines or the own mains cable. A cutting accessory
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
Ensure that the place where you wish to work is free
of power cables, gas lines or water pipes (e.g.
check using a metal detector).
Keep hands away from the rotating tool! Remove
chips and similar material only with the machine at
a standstill.
Pull the plug out of the socket or remove battery
packs from the machine before any setting,
retrofitting, maintenance or cleaning is effected.
8
Only use the screwdriver magazine for inserting
strip screws in industrial and commercial
applications.
Always familiarise yourself with the tool and any
potential dangers prior to use.
Observe all accident prevention and safety
regulations applicable in the country of use.
Use the screwdriver magazine only with the Metabo
screwdrivers SE 2500, SE 4000, SE 6000,
SE 18 LTX 2500, SE 18 LTX 4000 or
SE 18 LTX 6000.
Always read the safety warnings and operating
instructions for the relevant screwdriver.
Never direct an operational tool towards yourself or
other people.
Secure the workpiece to prevent it from turning
when screws are inserted.
Do not touch the screwdriver magazine or place
your hands in the area where you intend to insert the
screw while the tool is operating.
Always attach the depth stop and supplied handle
with strip guide before starting work.
Only use screw types and dimensions that are listed
in the Technical Specifications and make sure that
they are suitable for the material being processed.
Always use genuine Metabo screwdriver bits and
replace bits immediately if they become worn or
damaged. (see chapter 10. Accessories).
Switch the screwdriver to "Clockwise" rotation.
We do not recommend removing screws
("Anticlockwise" rotation) with the screwdriver
magazine attached.
Switch on the screwdriver before inserting any
screws to improve machine handling.
5. Overview
See page 2.
1 Standard depth stop
2 Bit holder
3 Clamping screw
4 Adapter
5 Screwdriver bit
6 Screwdriver spindle
7 Sealing sleeve
8 Push-button for depth stop setting
9 Sliding piece
10 Depth stop
11 Knurred wheel
12 Ratchet wheels
13 Screw strip
14 Strip guide
15 Handle