Conceptronic Grab’n’GO Guía De Instalación Rápida página 23

ENGLISH
Press the COPY button to initiate the copy process.
Note: When 2 or more valid FAT32 partitions are present, the display will indicate
"P1" before the copy process starts.
Use the POWER button to switch between the present partitions (Indicated with
"P1", "P2", etc.) and press the COPY button to copy the Memory Card to the
selected partition.
The Photobox will activate the Harddisk and start the copy process. You can follow the
process with the percentage indicator on the screen and the animated Copy Indicator.
When the copy is completed, the display will indicate 100% OK.
Press the POWER or COPY button. The display shortly indicates the amount of copied
files and folders and returns to the main screen.
Note: When a copy process fails (i.e. by removal of Memory Card), the display will
indicate ERROR. Replace the Memory Card in the Photobox and restart the copy
process.
Copy in progress Copy Complete
23