Using The Clearreader + For The First Time; Getting Started; Opening The Camera Arm; Positioning A Document - Optelec ClearReader+ Manual Del Usuario

+
Optelec ClearReader

3. Getting Started

+
3.1. Using the ClearReader for the first time
+
When you use the Optelec ClearReader for the first time, the battery needs to
+
be charged. To charge the battery, connect the ClearReader to a mains
+
power outlet using the ClearReader power supply. Charging takes
approximately 3 hours.

3.2. Opening the camera arm

To open the camera, locate the "push" sign on the camera arm at the front
+
of the ClearReader between the speakers. Gently push on the camera arm
until you hear a click. The arm will eject and move towards you. Close the
camera arm in the same way by pushing the end of the arm back to the
closed position until you hear a click.

3.3. Positioning a document

+
The Optelec ClearReader camera can capture an area of an A4 or letter-
+
size page measured from the front side of the ClearReader . To position the
+
document, place it in front of the ClearReader between the two document
positioning indicators with the top edge of the document aligned towards the
front of the unit. The orientation of the document will not influence the
recognition of the text.
29 English