Turning On The Clearreader; Standby Mode; Turning Off The Clearreader - Optelec ClearReader+ Manual Del Usuario

+
Optelec ClearReader
+

3.4. Turning on the ClearReader

+
To turn on the ClearReader , press the round Power button on the right-hand
side. The start-up process will take approximately 40 seconds. You will hear a
+
series of beeps to indicate that the ClearReader is starting up followed by the
+
start-up sound. Now the Power indicator is lit up and the ClearReader is ready
to use.

3.5. Standby mode

+
The ClearReader will go into standby mode by pressing, and holding down the Back button and
Forward button for 2 seconds. The standby sound will be played, the Power indicator will start
+ +
blinking and the ClearReader will go into standby mode. To wake up the ClearReader from
standby, press the Power button. When the batteries are fully charged, the standby time of the
+ +
ClearReader is approximately 40 hours. After 40 hours the ClearReader will power down. If
+
switching-on the ClearReader from the standby mode, the start-up process will take
approximately 5 seconds.
+

3.6. Turning off the ClearReader

+
Press the Power button to power down the ClearReader completely. The power down sound will
be played and the Power indicator will turn off.
English 30