Hkoenig MG30 Manual De Utilización página 6

5. After setting the presetting time, press the PROG button once, the letter TIMER on the LCD will
disappear. The LCD will display the current clock. After 15s, the blue indicator in PROG button will be
extinguished.
6. Press the on/auto/off button twice, the indicator in it will illuminate blue and flash. The LCD will
display the current clock. You may see the automatic start time by pressing PROG twice.
Note: You may cancel the automatic start function by pressing on/auto/off button once to stop
machine, if you want to brew coffee again immediately, yuo shall press on/auto/off button once again
to start brewing immediately. If you want to change the automatic start time, only following the above
1-4 steps again.
When the time is due the blue indicator in on/auto/off will stop flashing and illuminate red, then the unit
starts brewing. The appliance will be cut off power automatically after 40 minute if it has not been
manually disconnected at the completion of brewing.
MEMORY
If the power supply has been broken off or unplug the power cord unintentionally during operation, the
appliance will be continued previous operation automatically from the point when the disconnection
occurred provided that the pause does not exceed 10s, even without pressing any button. In the event
the pause time exceeds 10s, the display shows the default setting, the appliance must be re-started.