Cleaning And Maintenance - Hkoenig MG30 Manual De Utilización

CLEANING AND MAINTENANCE

CAUTION: Be sure to unplug this appliance before
cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid. After each
use, always make sure plug is first removed from wall
outlet.
1) Clean all detachable parts after each use in hot,
sudsy water.
2) Wipe the product's exterior surface with a soft, damp
cloth to remove stains.
3) Water droplets may buildup in the area above the
funnel and drip onto the product base during brewing. To
control the dripping, wipe off the area with a clean, dry
cloth after each use of the product.
4) Use a damp cloth to gently wipe the keeping warm
plate. Never use abrasive cleaner to clean it.
5) Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the mineral deposits left by the
water regularly according to the water quality in your area and the frequency use the appliance, the
detail is as follows:
1. Fill the water tank with water and descaler to the maximum level in the gauge of coffee maker (the
scale of water and descaler is 4:1, the detail refers to the instruction of descaler. Please use
"household descaler", you can use the citric acid instead of the descaler (the one hundred parts of
water and three parts of citric acid).
2. Place the carafe on the keeping warm plate, pay attention to let center line of carage aligns with that
of brew basket.
3. Press the on/auto/off button once and the indicator in it will be illuminated red. After a while, water
will drop out automatically.
4. After percolate the equivalent of one cup and then switch off the appliance by pressing the
on/auto/off button twice. The indicator in it will be illuminated blue and will be extinguished after 15s.
5. Leave the solution work for 15 minutes; repeat the steps of 3-5 again.